1-877-363-7876
Speak with one of our Thermal Engineers now. We are standing by to assist you with any questions. Email

Heat dissipation

Waste Heat Transport - Heat Sink

Heat Sink And Thermal Design
Download PDF (41k)

Heat Sink Design Goals and Constraints

  • A heat source is heating the air of a temperature sensitive enclosure
  • Heat needs to be carried to outside of the enclosure
  • Limit temperature rise of heat source to under 15°C

Heat Sink Solution:

Heat Pipe Heatsink

The customer has designed a temperature sensitive scientific device. One compartment of this device must have a low controlled temperature. However, there is a 13 Watt heat source in the compartment that cannot be moved out. The goal is to transport the heat from the source while limiting its rise in temperature.

Heat Sink Manufacturing

Enertron engineers chose to transport the heat outside of the compartment. Once outside, the heat can be dissipated into a forced airflow stream. A heat pipe is used to transport the heat,and an aluminum fin array provides the surface area. Because of the efficiency of the solution, the temperature rise of the heat source is held to under 15°C. This temperature rise is less than the customer's limit, thus allowing for high accuracy detection.


To learn more about waste heat transport or if you have an application you would like to discuss, please call one of our engineers at 1-877-ENERTRON (1-877-363-7876).

Heat Pipe And Thermal Solutions