1-877-363-7876
Speak with one of our Thermal Engineers now. We are standing by to assist you with any questions. Email

Electronics cooling

Heat Pipes

Click below for more Heat Pipe info:

Heat Sink And Thermal DesignHeat Pipes

Heat Pipe And Thermal SolutionsHeat Pipes Basics

Heat Sink ManufacturingSelecting a Heat Pipe

Heat Pipe HeatsinkDesigning With Heat Pipes

General Characteristics of Heat Pipes

Heat Sink And Thermal Design
  • Material: Copper
  • Working Fluid: De-ionized Water
  • Wick Structures: Groove, Sintered Powder Metal and Wire Mesh

Capabilities

  • Standard Diameters: 3, 4, 5, 6 & 8mm. Other diameters available upon request
  • Standard Lengths: 100 to 300mm
  • Standard Surface Finish: Nickel Plating
  • Standard Form: Round & Straight Pipe
  • Typical Heat Pipe Modifications: Flattening and Bending

Standard Form

Heat Pipe Heatsink
Dimension (mm) Tolerance (mm)
A +/- 1.5
D +/- 0.15

Modified Form

Heat Sink Manufacturing
Dimension (mm) Tolerance (mm)
A +/- 1.5
D +/- 0.15
B +/- 0.15

Recommended Minimum Bend Radius: 4X OD

Heat Pipe And Thermal Solutions